Digital Rails

HomeContentCNW_GenMP20_Set.zip

File: CNW GenMP20ND #1328 OLS/General Information and Shapefile Modification Instructions.txt

General Information
___________________________________
This is a completely fictional model based on a design by "The Rock" over at Train-Sim.com.
The general idea is that it is a modifed GP38-2, so the physics have been left like that.
No cabview is provided- however the sounds are aliased to Eric Cantu's Soo GP38-2 
available at Train-Sim.com (soo_4449.zip)

You must use the shapefile BNSF_GP38_2345 from the SLI BNSF Scenic Sub.

1) Uncompress the shapefile using whatever program you wish.

2) Edit the following sections-

Original:

	images ( 4
		image ( BNSF_GP38_2345a.ace )
		image ( BNSF_GP38_2345b.ace )
		image ( SD40_INT.ace )
		image ( SD40_GLASSb.ace )

Modified:

	images ( 4
		image ( MP20aND.ace )
		image ( MP20b.ace )
		image ( SD40_INT.ace )
		image ( SD40_GLASS.ace )

Original:

	prim_states ( 11
		prim_state 1_-_Default ( 00000000 0
			tex_idxs ( 1 0 ) 0 0 0 0 1
		)
		prim_state 1_-_Default ( 00000000 0
			tex_idxs ( 1 0 ) 0 1 0 0 1
		)
		prim_state 1_-_Default ( 00000000 0
			tex_idxs ( 1 0 ) 0 2 0 0 1
		)
		prim_state 1_-_Default ( 00000000 0
			tex_idxs ( 1 0 ) 0 3 0 0 1
		)
		prim_state 1_-_Default ( 00000000 0
			tex_idxs ( 1 0 ) 0 4 0 0 1
		)
		prim_state 1_-_Default ( 00000000 0
			tex_idxs ( 1 0 ) 0 5 0 0 1
		)
		prim_state 1_-_Default ( 00000000 0
			tex_idxs ( 1 0 ) 0 6 0 0 1
		)
		prim_state Material_#3 ( 00000000 1
			tex_idxs ( 1 1 ) 0 7 1 0 1
		)
		prim_state Material_#4 ( 00000000 0
			tex_idxs ( 1 2 ) 0 8 0 0 1
		)
		prim_state Material_#5 ( 00000000 1
			tex_idxs ( 1 3 ) 0 9 0 0 1
		)
		prim_state Material_#5 ( 00000000 1
			tex_idxs ( 1 3 ) 0 10 0 0 1
Modified:

	prim_states ( 11
		prim_state 1_-_Default ( 00000000 1
			tex_idxs ( 1 0 ) 0 0 1 0 1
		)
		prim_state 1_-_Default ( 00000000 0
			tex_idxs ( 1 0 ) 0 1 0 0 1
		)
		prim_state 1_-_Default ( 00000000 1
			tex_idxs ( 1 0 ) 0 2 1 0 1
		)
		prim_state 1_-_Default ( 00000000 0
			tex_idxs ( 1 0 ) 0 3 0 0 1
		)
		prim_state 1_-_Default ( 00000000 0
			tex_idxs ( 1 0 ) 0 4 0 0 1
		)
		prim_state 1_-_Default ( 00000000 0
			tex_idxs ( 1 0 ) 0 5 0 0 1
		)
		prim_state 1_-_Default ( 00000000 0
			tex_idxs ( 1 0 ) 0 6 0 0 1
		)
		prim_state 2_-_Default ( 00000000 1
			tex_idxs ( 1 1 ) 0 7 1 0 1
		)
		prim_state 19_-_Default ( 00000000 1
			tex_idxs ( 1 2 ) 0 8 1 0 1
		)
		prim_state 7_-_Default ( 00000000 1
			tex_idxs ( 1 3 ) 0 9 1 0 1
		)
		prim_state 7_-_Default ( 00000000 1
			tex_idxs ( 1 3 ) 0 10 1 0 1

Make sure not to change any spacing

3) Recompress the shapefile and name it to match the SD file.

4) Add a cabview of your choice

5) Create a consist with it and enjoy.

SUPPORT
___________________________________

No support is being offered for this model.


CREDITS
___________________________________

Original model, textures, cab, and sounds by Danny Beck and Streamlines.   http//www.streamlines.ca
Original GP38-2 Blank texture file by wiscentral
Lighting by Mark A.
Modification to textures, FreightAnimation, some textures on MP20e.ace, CabSeatTexture.ace- Matt Olesen

Valid XHTML 1.0 Strict