Digital Rails

HomeContentSCL_SET.zip

File: ReadMe.txt

Seaboard Coast Line Set
for Microsoft Train Simulator
January 4, 2004
By Diesel-West 
Copyright 2004 - Diesels-West
www.dieselswest.com   
-----------------------------------------------------------------------------
IMPORTANT: You must have the 'DASH9' and 'GP38" folders in the 'TRAINSET' folder with all of their sound files intact so that
your new locomotives can use some of those sounds. If you altered the these folders, you will need get them from your Train 
Simulator Disk or reinstall Microsoft Train Simulator.  
If you want to check it, it should be here>  ../Train Simulator/Trains/TRAINSET/DASH9/SOUNDS   and   ../GP38
-----------------------------------------------------------------------------
Installation: 
1.Extract the folders from this .zip into a temporary location. 

2.Copy and paste,or click and drag, the locomotive folder(s) into your 'TRAINSET' folder 
                    > Programs/Microsoft Games/Train Simulator/trains/TRAINSET  directory

3.Build your consist using the MSTS Activity editor.  
----------------------------------------------------------------------------
Locomotive information can be found by clicking the 'details' tab in Train Simulator
  
All our locomotives come with the 1024x1024 textures  
----------------------------------------------------------------------------
LEAD vs.TRAILING LOCOMOTIVES

'TU' LOCOMOTIVES CAN ONLY BE PLACED IN A TRAILING POSITION. LOCOMOTIVES NOT DESIGNATED AS 'TU' 
LOCOMOTIVES IN YOUR ACTIVITY EDITOR, ARE THE LEAD LOCOMOTIVES.  

If you attempt to run a TU locomotive as the lead loco, the simulation will not load properly. That's why it must
have a unique name in the activity editor (i.e., 'TU SP #7505') so you don't confuse 'TU' locos with 'lead' units in the locomotive 
list.

TU locos work great as idle units on a siding etc., and will throttle up when coupled by a drivable unit. 
If you attempt to run a TU locomotive as the lead loco, the simulation will not load properly. That's why they
have unique names like 'TU S.P. #7505' so you don't confuse them with other locos in the locomotive list of the activity editor.
----------------------------------------------------------------------------
AIR HORNS

Operating the air horns on these locomotives can be tricky. The stock locomotive air horns that came with Train Simulator were
made so that they would loop(repeat) without any pops ot clicks, as you force the sound to continue. Although it works well for 
that purpose, there is no modulation, or change in shape and character of the horn sound. The horn sounds we use have not been
excessively modified, and have much of their original character. The only problem is that they sometimes will not seamlessly loop. 
Most of our horn sounds will give a medium length blast and a short one. We suggest that you play with a specific horn sound until 
you have a feel for how long you need to hold the space bar to get the correct blast. The short blast is most easily achieved by 
briefly pressing the space bar just before the longer blast has ended. 
----------------------------------------------------------------------------
SPECIAL INSTRUCTIONS
SCL #2109 has an alternative air horn inside the 'SOUND' folder of the locomotive. Sometimes we leave alternative horns in the
'SOUND' folders of lead locomotives, should you want to try a different horn sound. 

MAKING A LEAD UNIT FROM SCL #1715
We have included a 'MakeLU' folder for the SCL #1715 trailing unit.  Follow the instructions inside, for making the SCL 1715 a 
lead unit locomotive. 



Valid XHTML 1.0 Strict