Digital Rails

File: UP_SD70M_3983/Install_UP3983.txt

ÿþBEW Renumber of MLT SD70M #9804 into UP Patched SP SD70M #3983.

MLT Payware Cascades Crossing SD70M #9804 is needed for shape file file.

Copy the shape file SP_SD70M_9804.s from the SP_SD70M_9804 folder on your hard drive to the folder created by unzipping this download, rename the shape file to UP_SD70M_3983.s  move the folder to your MSTS TRAINS\TRAINSET directory, move the .con file to the TRAINS\CONSISTS directory and you should then be able to find the engine within the sim and run it.

I have applied the front coupler fix to the engine files and increased the derail buffer force as well as raising the sd file height for ground clearence to 0.90 (these all help to eliminate bouncing and give a better ride over points) if you do not wish for these mods they are easily reversed by copying back the default values from the #9804 engine file.

The cabview is aliased to the Cascades SD70M #9804 to save space

Gratefull thanks to all at MLT for the great engines to work with in the first place.

Special thanks to Colin who found the Power by the Mile logo for me.

A consist is included to get you up and running.

Bernard Grant (bergerburn)

Valid XHTML 1.0 Strict